Ultrasonic vibrating screen is composed of vibrating screen and ultrasonic wave source. It converts 220V, 50Hz or 110V, 60Hz electric energy into 36kHz high-frequency electric energy, inputs ultrasonic transducer and turns it into 36kHz mechanical vibration. The generated power ultrasonic makes the screen vibrate at high frequency. When the materials on the screen make low-frequency rotary vibration movement, they are superimposed with ultrasonic vibration, which can not only prevent the mesh from blocking, but also improve the output and quality of the screening machine, so as to achieve the purpose of rapid screening and screen cleaning, and make the screening of ultra-fine powder easy. Based on the traditional vibrating screen, a low amplitude and high frequency ultrasonic vibration wave (mechanical wave) is introduced into the screen to change the screening performance of ultra-fine separator. It is especially suitable for users with high added value and fine split.
1. Different screening accuracy: due to the equipped ultrasonic screening system, the screen surface has a high-frequency and low amplitude ultrasonic vibration wave while doing three-dimensional motion, so that the materials are suspended on the screen surface at low altitude, so as to increase the screening accuracy. The screening accuracy can reach more than 95%, while the screening accuracy of ordinary vibrating screen is generally about 60% – 70%;
2. Effectively solve the problem of screen blocking: the screen cleaning device of the ordinary vibrating screen is a bouncing ball, which can clean granular materials, but the screen cleaning effect is not obvious for precision powder materials or some special materials. Due to the existence of ultrasonic vibration wave, the ultrasonic vibrating screen can effectively clean the screen surface to achieve the purpose of no screen blocking;
3. Different output: due to the installation of ultrasonic screening system, the output of ultrasonic vibrating screen in screening powder, particle and slurry materials is 2-10 times that of ordinary vibrating screen. Technical Parameter
| Size | SF-400 | SF-600 | SF-800 | SF-1000 | SF-1200 | SF-1500 | SF-1800 | SF-2000 |
| Efficient diameterscreen(mm) | 390 | 540 | 730 | 900 | 1100 | 1400 | 1700 | 1886 |
| Efficient screenarea(m²) | 0.1207 | 0.2289 | 0.4183 | 0.6359 | 0.9499 | 1.5386 | 2.2687 | 2.7922 |
| Layer(s) | 1-5 | |||||||
| Motor power for 1-3layers(KW) | 0.25 | 0.37 | 0.55 | 0.75 | 1.1 | 3 | 4 | 4 |
| Motor power for 4-5layers(KW) | 0.37 | 0.55 | 0.75 | 1.1 | 1.5 | 4 | 5 | 5 |
Ultrasonic vibrating screen machine uses ultrasonic waves to excite the screen mesh. The excitation causes the material to jump and be separated based on its size and shape. This technology is highly effective at separating difficult-to-screen materials and particles smaller than the mesh size. Ultrasonic vibrating screens also have low noise and high screening efficiency making them useful in a wide range of industries including pharmaceuticals, ceramics, and metallurgy.
The standard test screen (200 mm) is a standard test screen which can be installed with a standard test screen frame with a diameter of 200 mm. The standard inspection screen frame with diameter of 200mm is a common screen frame in laboratory.
Standard Type Stainless Steel Vibrating Sieve are a traditional part of the classifying process of dry powders and filtering serous fluids. They sift materials by particle size through a screen. With high quality woven wire mesh screens and the ultrasonic screen technology, vibratory separators are now able to separate much finer materials .
Linear vibration screen is the use of vibration motor vibration principle, so that the material on the screen surface to throw a jump forward for linear movement, in order to reasonably match the screen to achieve the purpose of screening.
The linear tumbler screen machine is a versatile piece of equipment used for separating materials of different sizes and shapes by applying vibration to the screen surface. It is widely used in industries like food, pharmaceuticals, and chemicals for material classification, sorting, and sieving. Its high efficiency, large capacity, and low noise make it a preferred choice for industrial screening processes.
The high-frequency vibrating screen adopts a high-frequency two-stage motor with a rotating speed of 3000 times / min, which destroys the surface tension of the material and the high-speed vibration of the fine material on the screen surface.
Phone
+86 13949618816Xinxiang Sanfeng Machinery Co., Ltd was founded in 2006. The company is advanced manufacturer of vibrating sieve,
Copyright © 2023 Xinxiang Sanfeng Machinery Co., Ltd.Power by yisainuo
